Expédition avantageuse dans le monde
En ligne depuis plus de 20 ans
Plus de 100.000 articles
Magasin de 1.000m² à Kronberg (D)
Acheter
Produits: 180
Valeur: 21.553,86 €
 
Livraison vers: FR

Coupon promotionnel:

vue d'ensemble
produit de 40

Shimano XT frein disque 6-trous SM-RT76 2 (emballage de vente au détail)

à partir de 20,07 €

Die Shimano SM-RT76 2 Bremsscheibe für Dein Rad.

Die zweiteiligen Shimano-Bremsscheiben mit Aluminium-Trägerstern sehen nicht nur stark aus, sondern bieten auch klare technische Vorteile gegenüber einteiligen Scheiben. Sie führen Wärme besser ab, unterdrücken Vibration und sind verformungsbeständiger.

Highlights der Shimano SM-RT76

  • Durchmesser: 160, 180, 203mm
  • Befestigung: 6-Loch
  • Adapter: Aluminium
  • Material Rotor: Stainless Steel

Lieferumfang

  • 1x Shimano SM-RT76 2 Bremsscheibe 6-Loch (Durchmesser siehe Artikelbezeichnung=
  • Befestigungsmaterial
Tous les prix ​​lors de l'expédition vers France; excl. livraison
180mm (emballage de vente au détail)
Numéro d`article 62800165 || EAN/UPC: 4524667744665  || Numéro d`article du fabricant I-SMRT76M2
Vérification de disponibilité et de livraison en ligne

pièce à 23,09

Acheter
203mm (emballage de vente au détail)
Numéro d`article 62800166 || EAN/UPC: 4524667744719  || Numéro d`article du fabricant I-SMRT76L2
Vérification de disponibilité et de livraison en ligne

pièce à 27,13

Acheter
160mm (emballage de vente au détail)
Numéro d`article 62800164 || EAN/UPC: 4524667744696  || Numéro d`article du fabricant I-SMRT76S2
Vérification de disponibilité et de livraison en ligne

pièce à 20,07

Acheter
En ce moment nous ne pouvons vous proposer qu`un texte en Anglais:

Shimano

Shimano is one of the giants in the bicycle industry and has a long history. The founder Shozaburo Shimano explained the foundation of the company in 1921 like this:

"My target is making Shimano products the best in Kansei (region around Osaka in Japan), after that in Japan and in the end the best in the world."

This idea still permeates all Shimano products. Wheter it's a racing bike or a mountain bike, you will find the components from Japan everywhere on the bikes of the worlds best athletes. One of the most important innovations was the development of the indexed shifting by Shimano. The principle that significantly simplifies and speeds the gear change can be found everywhere today.

En ce moment nous ne pouvons vous proposer qu`un texte en Anglais:

When you select a brake disk you have to look after several factors. Especially then when it is a backfitting disk from a foreign manufacturer.

  • Affiliation:
    Currently there are two ways to fix a brake disks on a hub. On the one hand the 6-hole affilation after IS2000 (International Standard) and on the other hand the center-lock affiliation which got invented by Shimano. As the name says the disk gets fixed on the hub via six spikes in the 6-hole affiliation. In the center-lock affiliation hub and brake disk have a gearing. The brake disk is clipped on and fixed via a central nut.
    You can convert center-lock hubs to 6-hole with an adapter so that you can optionally use both disk types. But it doesn't work conversely.
    Older forms of fixation with three or four boreholes as well as the 4-holes affiliation of the Rohloff Speedhub are the exception. Furthermore the first generation of the Shimano Saint group has a bigger center-lock which has been adjusted.

  • Diameter:
    The diameter of a disk brake should always accord to the current disk. If you want more brake power you can use a bigger disk. Thereby you have to observe that you need an according adapter for the caliper to adapt it on the bigger disk. Furthermore the approval of the fork or rather frame manufacturer concerning the size of the disk has to be observed.

  • Height of the brake disk:
    This refers to the hight of the surface on which you finally brake. In no case this height should be smaller than the brake covering. The height of the brake disk can't be easily determined when it comes to modern disks with a wave profile. Then you have to stick to the recommendation of the manufacturer.

  • Material:
    Disk brakes are generally made of steel. But in some leightweight construction models aluminium is used. Then you absolutely have too look after the use of suitable (and specified by the manufacturer) brake coverings. Because when you select a wrong brake covering this can lead to a collapse of the brakes or a downfall at worst!

  • Maintenance:
    Disks with a slight wobble can be regulated with suitable tool or with parallel nippers. This requires a little manual skill. If brake disks are strongly deformed or scratched by contact with stones they have to be changed as well as in the case of excessive wear.
    Disk brakes can be cleaned with isopropanol or with a brake cleaner.
    A blue coloration of the disk is a sign of a thermal overload of the disc. In this case you should obstruct a bigger disk and/or adjust your braking behaviour.

HINT: Brakes are a security relevant element! If you feel unsure about assembly, maintenace and repair imperatively adress to us or another professional workshop!
Tu as trouvé une erreur ? L`image n`est pas correcte ? Y-a t-il besoin d`un complément d'info ?

Merci pour le tuyau!
Si tu penses qu`il y a une bonne raison pour baisser encore plus le prix, merci
de nous le dire!
 
Syntax error in template "/usr/local/eShop/views/theme_eshop7/RTE/eshop.HTML_footer.RTE.3.tpl" on line 67 "{/if}" unexpected closing tag